This board including high frame rate sensor and 7 series of FPGA and it has also SFP+, QSFP+ interface GIGA bit Ethernet.
Description:
Image Sensor
LUX2100
| Optical format | 4/3” |
| Active resolution | 1952 x 1096 pixels |
| Pixel | 10.0 um pitch PPD shutter pixel |
| Full well | >20K e- |
| Read Noise | 42 e- (input referred) |
| Responsivity | 7.5 V/lux-sec @ 550nm typical without color filter 4.2 V/lux-sec @ 550nm typical with color filter |
| Conversion gain | 28 uV/e- |
| Frame Rate | 1,000 FPS @ 1920 x 1080 1,500 FPS @ 1280 x 720 125,000 FPS @ 1920 x 8 It can be windowed down to achieve frame rates of 300,000+ FPS. |
| Data Output | 32 LVDS ports @ 1,000 FPS 16 LVDS ports @ 500 FPS 8 LVDS ports @ 250 FPS 4 LVDS ports @ 125 FPS 900 Mbps per port @ 75 MHz (12 bit mode) |
| ROI | Windowing and up to 8 simultaneous ROI’s are supported |
| Power supply | 3.3V Analog, 1.8V Analog, 1.8V Digital |
| Power consumption | 3.9W @ 1,000 FPS full resolution |
| Package Type | Ceramic 203 uPGA in a small footprint of 22.8 mm × 28.8 mm |
| Color Filter | RGB or Monochrome |
